Subject Code & Title :- CS5053 Cloud Computing And The Internet of Things
Assessment Type :- Assignment
This assignment will be marked out of 100 and carries 50% of the over all module weighting corresponding to the Internet of Things aspect of this module. Your.pkt file and the report must be uploaded to WebLearn. The assignment must be carried out individually the module WebLearn site and examples provided with Cisco Packet Tracer software.
CS5053 Cloud Computing And The Internet of Things Assignment – UK
Aims :-
The aim of this assignment is to model a Smart Home infrastructure. A smart home & s devices are connected with each other and can be accessed through a central control point – a smartphone tablet laptop or a desktop PC. Smart homes can feature either wireless or hardwired systems or both. In both cases they are internet connected through the default gateway and a networking device such as a router switch or a cable modem. The devices included in your simulation are going to be: router switch home gateway registration server laptop desktop PC smartphone tablet webcam air conditioning heating element thermostat temperature meter solar panel battery smoke detector CO and CO2 detector fire sprinkler temperature sensor water level monitor motion sensor alarm siren home speaker LCD display light coffee maker ceiling fan 3 windows lawn sprinkler garage door, classic car and the front door. You will also be required to write a report about your simulation. Your report should be no more than 1200 words in length excluding the table of contents and appendices. The report should include 3 samples from your log book.
Deliverables :-
Create a new Packet Tracer simulation. Include all the devices listed above and connect them through home gateway wirelessly and through Fast Ether net ports or micro controllers where appropriate. Implement the 7 simulation tasks listed below.
Write a report describing the design and simulation of the Smart Home make sure to attach 3 samples from your log book.
When you are ready to submit your solution upload your Packet Tracer (.pkt) file to WebLearn together with your report in Microsoft Word and when you are sure that you have uploaded the correct files press the submit button.
Simulation tasks :-
These are the components devices and controllers you need to setup:
1.The components that need Fast Ethernet connections are: router switch home gateway registration server desktop PC.
2.The devices you need to connect wirelessly to home gateway are: laptop smart phone tablet web cam temperature meter water level monitor CO/CO2 detector solar panel home speaker light coffee maker ceiling fan 3 windows lawn sprinkler garage door and the front door.
CS5053 Cloud Computing And The Internet of Things Assignment – UK
3.You will require microcontrollers (MCU boards) to connect:
smoke sensor, temperature sensor, ceiling sprinkler
webcam, motion sensor, alarm, siren, LCD
These are the scenarios you need to implement:
S1. Control the appliances on/off through the laptop smartphone or PC. Login to IoT monitor to turn on/off the appliances. This includes webcam home speaker light coffee maker ceiling fan lawn sprinkler 3 windows garage door and front door.
S2. When the lawn sprinkler is turned on the Water Level Monitor will measure the amount of water that has been released and send report to the Registration Server. From PC laptop or smartphone login to IoT monitor and control the Lawn Sprinkler remotely.
S3. The sun charges the solar panel. The solar panel sends electricity to the battery. This electricity is read by the power meter connected between them. The battery then distributes power to each connected device. The registration server is reading power produced from the solar panel power read from the power meter and power available on the battery.
S4. To activate the alarm – Turn on the Car to increase CO/CO2 Level. To deactivate the alarm – Turn off the Car to decrease CO/CO2 Level.
S5. Move the Fire near the Fire Monitor to set off the fire sprinkler system.
S6. The Registration Server is configured to turn on the webcam when motion is reported by the Motion Detector.
S7. The air conditioning and heating element are connected to the thermostat. The temperature sensor readings set the heating or cooling through the thermostat.
Report
The report must have a title page with the student’s name & ID a table of contents and page numbers. It must be written in proofread English in good style. Marks will also be awarded for the quality of writing and the presentation of the report.
The report must present all the components of the work brief description of each & the connections between the devices.
Please use the screenshots to show the modelling and the text narrative to explain how/what was developed.
CS5053 Cloud Computing And The Internet of Things Assignment – UK
It should describe the general technical content of the model especially present and explain the scenarios tasks implemented illustrated by screenshots.
The report should contain a conclusion where you evaluate your work reflecting on what you learnt from the assignment. You are advised to study the learning aid on reflective practice which is linked from the module in WebLearn.
Also in the conclusion consider the societal impacts of smart technology. Try to find pros and cons of smart technology in terms of its effect on everyday lives from the holistic point of view.
There should be 3 samples from your logbook provided in the appendix.
ORDER This CS5053 Cloud Computing And The Internet of Things Assignment NOW And Get Instant Discount
Read More :
