Unit Title: Production Engineering And Operations Management
Assessment Type: Assignment
1.To review the literature related to industry 4.0 technologies (Intelligent manufacturing, additive and sustainable manufacturing) methods on production and manufacturing industry.
2.To investigate the factors that impact the production and manufacturing industry due to COVID 19.
3.To identify the suitable approaches based on Technologies that propel the industrial rev 4.0 to minimize the impact of COVID 19.
4.To propose the new methods based on these technologies to reduce the impact of COVID 19 as well as safety of workforce in production and manufacturing industry.
Production Engineering And Operations Management Assignment – UK.
Technologies of the Industrial Revolution 4.0 to minimize the impact of COVID 19 in the production of the manufacturing industry
AIM: The aims of the project to propose the incorporation of additive and sustainable manufacturing methods to minimize the impact of Covid-19 on production and manufacturing industry. The project will consider the safety of workforce.
LITERATURE RIVIEW :
Sustainable manufacturing Evolution:
The development of industrial goods that have little environmental effect, preserve energy and environmental resources, are safe for workers, society, and customers, and are commercially viable is Sustainable manufacturing.
Production Engineering And Operations Management Assignment – UK.
Because industrial production is the core operation in a product’s supply chain, while comparing tangible goods, implementing the system, and encouraging sustainability in its procedures must focus on a sustainable production strategy that focuses on a wider, innovation-based 6 R methodology not just to reduce, reuse, and recycle but also restore, redesign, and re manufacture the products over numerous life. Reduce refers to the decreased utilisation supplies in pre-manufacturing, the minimized use of products and resources during production, and the waste minimization during the usage stage in the 6R technique. Reuse, indicates the reuse of a commodity or its constituents after its primary life-cycle for future life in order to limit the use of fresh raw materials in the production of such goods and components. The practice of transforming stuff that would otherwise be deemed garbage into new materials or goods is known as recycling. The process of gathering items at the end of their useful life, dismantling, classifying, and cleaning them for reuse in later product life- cycles is called as the recover. The approach of redesigning commodities to ease potential post-use operations via the adoption of strategies such as Design for Environment (DfE) to create the item extra sustainable is termed as redesign, whereas re manufacture includes the re-processing of previously used commodities for regeneration to their natural position or a new structure by to include as much components as feasible without performance degradation. The diagram depicts the growth of several manufacturing models and their
benefits to client value, as well as the suggested 6-R confined approach.
Additive Manufacturing:
Additive Manufacturing is the codified name for formerly known as Rapid Prototyping and is now often referred to as 3 D Printing. Rapid prototyping is a phrase utilized in a range of sectors to define a technique for fast developing a system or part depiction prior to final launch or marketing. The priority is on producing things rapidly, with the outcome being a prototype or basic model from which subsequent models and, finally, the final product may be generated.
factors that impact the production and manufacturing industry due to COVID 19.
Production :
While production as a whole has not recovered to pre-pandemic levels, some of its industries have been more severely affected than others (Figure 3). This is particularly true for mining of coal and lignite (which has been affected by mine closures and falling demand for coal for electricity generation); manufacture and repair and maintenance of air and spacecraft; manufacture of coke and refined petroleum products; and manufacture of alcoholic beverages.
Production Engineering And Operations Management Assignment – UK.
Other industries such as manufacture of other chemical products, mining of metal ores, and other mining and quarrying (where the materials mined are used in construction) have performed more strongly.
Figure 3: Almost half of the production industries are below their February 2020 level but some, such as manufacture of other chemical products, have grown considerably
ORDER This Production Engineering And Operations Management Assignment NOW And Get Instant Discount
Read More :-
